Aluminium Precision Drawn Tubes
Outside Diameter | 1 mm to 170 mm |
Thickness | 0.15 mm to 10 mm |
± 0.09 mm is Normal Tolerance on OD/ID & thickness | |
(± 0.03 mm Tolerance on OD/ID and thickness also offered on request) |
Aluminium Precision Drawn Tbues in Coil Form
Maximum Outside Diameter | 16 mm |
Maximum Thickness | 02 mm |
Maximum Coil Weight | 30 Kg |
Aluminium Precision Drawn Rods
Maximum Outside Diameter | ∅ 35 mm |
± 0.05 mm Normal Tolerance | |
(± 0.01 mm Tolerance also offered on request) |
Aluminium Precision Drawn Profiles
Circumscribing Diameter | 50 mm |
Alloy Processed
India (ISS) |
EU (EN) |
ISO | Britain (BS) |
USA (AA) |
Canada | Remarks |
---|---|---|---|---|---|---|
19500 | 1050(A) | AI99.5 | 1B | 1050 | 1 S | NON-HEAT TREATABLE ALLOYS |
19700 | 1070(A) | AI99.7 | - | 1070 | 99.7 | |
19000 | 1100 | AI99.0Cu | 1C | 1100 | 2 S | |
31000 | 3003 | AIMn1Cu | - | 3003 | D3S | |
- | 3103 | AIMn1 | N3 | 3103 | 3S | |
- | 5049 | - | - | 5049 | B4S | |
52000 | 5052 | AIMg2.5 | N4 | 5052 | 57S | |
55000 | 5056(A) | AIMg5 | N6 | - | A56S | |
54300 | 5083 | AIMg4.5Mn | N8 | 5083 | D54S | |
53000 | 5086 | AIMg4Mn | (N5/6) | 5086 | B54S | |
5XXX | - | АMg6 / АМг6 ( Russian Standard ) |
- | - | - | |
24345 | 2014 | AICu4SiMg | H15 | 2014 | - | HEAT TREATABLE ALLOYS |
24534 | 2017 | AICu4MgSi | H14 | 2017 | 17S | |
- | 2014 | AICu4Mg1 | 2L97 | 2024 | 24S | |
- | 2219 | - | - | 2291 | - | |
62400 | 6005 | - | - | 6005 | C51S | |
- | 6060 | AIMgSi | - | 6060 | 50S | |
65032 | 6061 | AIMg1SiCu | H20 | 6061 | 65S | |
63400 | 6063 | AIMg | H9 | 6063 | E 50S | |
64430 | 6351 | AISi1Mg | H30 | 6351 | B 51S | |
- | 6082 | ALSi1MgMn | - | 6082 | - | |
76528 | 7075 | ALZn 5.5MgCu | 2L95 | 7075 | 75S |
Standard Followed: IS 738, EN754, ASTM B483M, B210M, B234M, BS4L 100
Advantages
Very close Dimensional Tolerances :- +/- 0.02 mm
Very Good surface finish :– Ra 0.4 µ
Added Mechanical / Physical Properties
Accurate Straightness :– 1:4000 mm
Very small (from 1 mm diameter) very thin (from 0.2 mm) section is possible
Non-heat treatable, alloy can be given in work Hardened Condition. Which results in added mechanical properties
Very precise Quality and Eccentricity
Special Shapes with High Accuracy in Dimension
Telescopic Profile with close dimension is possible
Product Quality supported by own state-of-the-art Quality Assurance Laboratory having all modern testing equipment
Special process like precision cutting in small pieces (Tolerance of ± 0.2 mm)
Bending, Flaring, Punching, Hard Anodizing and color Anodizing can also be carried out on request
Applications
These extruded and drawn products fulfill the requirements of Good Surface Finish; have very close dimensional tolerances and added mechanical properties which are used for:
Aerospace & Defence Applications
Telescopic Tubes for Communication Mast, Safety Mast and Bomb Disposal Manipulator
Mortar Tube
Missile Project
Tube For Amphibian Tank
Tube for Cryogenic Fuel Supply
Heat Pipe Application
Helicopter Engine Cooler Application
Tube For 70 mm Rocket
Special alloy High Strength Rod to make Aerospace V65 grade Rivet
Pneumatic Cylinders Barrel
Compressed Air Piping
Alupress Cots/ Alufit Cots for Cotton Spinning Industry
Rectangular & Round Wave Guide for Satellite / Space Communication / Telecommunication Purpose
Automotive Component Application
Exhibition Display System
Carburetor Float Pin Application
Hydrogen Cell for Back-up Power
Mining & Drilling
Mosquito Repellent
Heat Exchanger
Marine Application
Button Making – Nylon / PP Rod Casting
Moping Equipment Handle
Sealing Ring for Disposable Blood Bags
Roller for Conveyors
Aluminium Tube For Automobile